Tag Archives: Mix It Up 4

OTHER PROJECTS, TUTORIALS

Full Deck Challenge 34/2025 – happy scraps

Leave a comment

Hello and happy Wednesday! Here is my take on the ShanoukiArt Full Deck Challenge 34/2025: happy scraps.

For this one I used plenty of leftover bits from the previous deck cards (old book paper, collage papers gifted to me by Yuna from Australia, gelli printed papers). I wripped them into tiny pieces and arranged them very randomly onto the deck card. The book paper and the gelli printed paper bits are my carry over items this time.

After that I added stamping here and there with the Mix It Up 4 stamp set (Rubber Dance). I also added my constant, the date stamp. Next I used some Posca pens to add details to the papers (white, pink and blue).

For the focal point I used a premade tree (Textured Xmas Trees 2 by Rubber Dance) and some yarn. The premade tree is done ona glossy paper with Dina Wakley Gloss Sprays and stamping. I then also added some orange Posca pen details to the tree. Then I finished the deck card with a sentiment (Mix A Sentiment 2023 stamp set).

Here is again the process video – have fun watching!

See you again next week with another FDC take!
xxx, Sanna

CARDS, RUBBER DANCE ART STAMPS, Uncategorized

Butterfly fodder card – Rubber Dance

Leave a comment

Happy Wednesday! Here is another card share, again created using Rubber Dance stamps. For this one I used the Butterflies and Moths fodder and the Mix It Up 4 stamp set.

I stamped the background pattern with Iced Spruce Distress Oxide ink and the Mix It Up 4 stamp set repeatedly. After that I grabbed the butterfly fodder I had previously created using a gelli printed paper and with black ink stamped and fussy cut butterflies.

You can find the how-to reel for the butterfly fodder on my Instagram under reels.

I adhered the butterflies directly onto the stamped card base, then added a Tim Holtz label sentiment and some Dina Wakley Gloss Spray droplets to the butterfly wings.

Hope this card gives you some spring “feelz”!!! Happy crafting,
xxx, Sanna

Supplies:

CARDS, ELIZABETH CRAFT DESIGNS, RUBBER DANCE ART STAMPS, TUTORIALS

From residue gelli prints to card focal points – Rubber Dance

Leave a comment

Hello, it´s my turn again over at the Rubber Dance blog today and I am up sharing another take on residue gelli prints turned into card focal points. Like on my last post, I created another set of die cut focal points out of residue gelli printing papers. This time using different color combinations and stenciling the card backgrounds, instead of stamping.

I first die cut the residue gelli printing paper with die cut dies into different forms and sizes (banners, circles and squares). I then added some stamping with black stamp ink and some heat embossed details with red embossing ink and the Pencil Marks 8 stamp set.

After that I took the Ornament 1 stencil and added brown Distress Oxide Ink thru it onto the die cut pieces. Then I took the Mix It Up 4 stamp set and added some stamping with blue StazOn ink here and there onto the background.

Next I took out some premade Sketchy Leaves 5 stencil fodder and adhered them onto the die cut pieces. On top of those I added some yarn and a fodder butterfly, created with a gel plate and Butterflies and Moths stamp set.

I also wanted to add a stamped word onto the focal point elements and took out the Mixed Sentiments 1 stamp set. I just used one word from each sentiment, instead of the whole quote.

Instead of adding a stamped background, I chose to stencil Distress Oxide Inks thru the Ornament 1, Dotted 1 and Organic 4 stencils onto the card bases and then adhered the die cut pieces with fodder onto the cards.

I also wanted to add a stamped sentiment to every card, so I used an older German birthday sentiment stamp set from my own stash for stamping them.

After finishing the cards, I added some Gloss Spray droplets to the butterflies wings here and there for additional color and interest.

Here is a video on how I created the Sketchy Leaves 5 stencil fodder that I used on some of the focal point elements:

And here is a short video on the focal point elements and how I put the cards together:

I hope I could inspire you to play with your Rubber Dance stamps and stencils and create colorful cards.

Happy crafting
xxx, Sanna

Supplies:

CARDS, RUBBER DANCE ART STAMPS, TUTORIALS

Residue gelli printing paper as card focal point – Rubber Dance

Leave a comment

Hello, it´s my turn for a project share over at Rubber Dance blog today. I am up with a fun card project, created using residue gelli printing paper that I turned into card focal points. For this project I used the Dotted 1 and Organic 4 stencils and Mix It Up 4 as well as Butterflies and Moths stamp sets.

When gelli printing, I always take a sheet or two of paper to brayer the residue paint and/or lift paint from the gel plate on to. So sometimes these paper sheets are full of paint layers and I figured, I could upcycle them and make something fun of them.

I first took some die cut dies out and die cut the paper sheets into smaller pieces (circles, banners etc.). Next I took out the Dotted 1 and Organic 4 stencils and added some white and golden heat embossing powder areas to the die cut papers. Next I mixed white modeling paste with magenta acrylic paint together and applied the paste thru the Dotted 1 stencil onto the die cut pieces.

After that I took the Mix It Up 4 stamp set and added stamped details with black and light grey stamping ink to the pieces. After that ink and tinted modeling paste was dry, I added some Gloss Spray details in yellow, turquoise and fuchsia on top.

Now all I needed to do, was to stamp some details to the white card bases with Distress Oxide Inks and the Mix It Up 4 stamp set. I chose lighter colors as a contrast to the bold focal point pieces here. I then adhered the die cut focal point pieces with 3D foam tape onto the card bases, added some Butterflies and Moths fodder to go with them and chose a sticker sentiment to each card. For finishing touches I added a few Gloss Spray droplets alongside the card sentiments for additional interest.

Here is a video on the creating process for you to watch. I hope you get inspired by it!

Happy crafting,
xxx, Sanna

Supplies:

CARDS, RUBBER DANCE ART STAMPS, TUTORIALS

Layered and Distress Ink stenciled butterfly card – Rubber Dance

Leave a comment

Hello everyone, it´s again my turn to share a project over at Rubber Dance blog today and I am up with a video tutorial to a heavily stenciled and lightly layered butterfly card. For this card I used the Stars 1 and Lattice stencils as well as the Mix It Up 5 stamp set. I also used the Butterflies and Moths fodder I had created for my last share.

I used a gelli printed background paper on the card. I created that one using the Mix It Up 4 stamp set with my gel plate. You can find videos around gelli prints with Rubber Dance stencils and stamps here.

I wanted to keep the colors on the card very light and matching. I therefore added stenciling with pumice stone & tumbled glas tones. They go very well with the background and don´t create a contrast too strong.

After stenciling, I added some stamping in same colors to the papers to create more interest and details. The edges of the paper are distressed and inked and the die cut flag is adhered to the paper with 3D foam for more depth.

I´ve also used Gloss Sprays to add splatters to the paper layers. I am a big fan of splatters. I think they add a fun element to projects. For finishing touches I added the gelli printed and stamped butterfly fodder (made using the Butterflies and Moths stamp set), a Tim Holtz sentiment sticker and some very old wood veneer stars. The black splatters are done with a wet brush and a watercolor crayon.

For more info, here is a full start-to-finish video for your to watch:

I also can not resist a little bit of glitter here and there sometimes. So the bodies of the butterflies got a little coat of Stickles in the end. I hope you like the idea and try it out yourself! Happy crafting,
xx, Sanna

Supplies:

CARDS, RUBBER DANCE ART STAMPS, TUTORIALS

Inspirational cards for the New Year with positive and negative stencil images

Leave a comment

Hello, it´s my turn again today over at Rubber Dance blog and I am up with a set of motivational/inspirational cards for the new year, created using positive and negative stencil images. For the cards I used the Textured Mushrooms 2 stamp set with the Wheels and the Leaves 2 stencil.

Here is how I created these cards:

I first took a white card base and added Distress Oxide Ink in blue tones thru the Leaves 2 stencil onto it. For my second background I then took the already inked stencil, spritzed it with water and pressed the wet image onto another piece of white paper and let that dry.

You can see both backgrounds here on the above cards. For centerpiece I used leftover pieces from my previous projects, like the leaf images, the Gloss Spray mushrooms and the circle image. The sentiment are created with the Mix A Sentiment 2023 stamp set. I stamped the images on white paper, then fussy cut every word and arranged different sentiments with the words.

For the second set of cards with orange and red toned backgrounds, I did the same, except I inked a piece of white mixed media paper, then spritzed the Wheels stencil again with water and made a negative image with the leftover ink. In fact, the inked stencil image can be used several times, until the stencil has no ink/color left.

For these cards I used the basic idea, like on the blue cards. If the card recipient loves strong color combinations, then you can give them the positive image card and if not, go for the lighter, negative stencil image background.

Since the Sketchy Leaves stamp is sold out due to popular demand, I will link an alternative product for you. Basically any leftover images can be used as centerpieces here. Just cluster them and add an interesting sentiment and your inspirational mixed media cards are done.

Hope you get inspired!
xxx, Sanna

Supplies: