Misted background die cut cards – Elizabeth Craft Designs

Hello there, today I´d like to share a set of easy to make misted background, die cut cards with you. They are also up over at the Elizabeth Craft Designs blog. I really like to use color when crafting and spray inks are so much fun. Therefore I wanted to share this simple and easy card making idea with you!

This is how I created the cards:
1. Take a cardboard box (to protect your working area!) and place a piece of white carstock into the box. Very randomly spray areas of the white cardstock with purple and then green spray ink (you can naturally choose any other color combination too). Dry with a heat tool.
2. Take the dry misted cardstock piece and place three die cut dies onto it and run thru your die cutting machine.
3. Remove the die cut parts – save them, as you can use them on another card – and use the background. Adhere onto a white card base.
4. Take another piece of white cardstock and die cut a sentiment/word at least three times. Adhere the die cut words on top of each other and then onto the card.
5. Apply Glossy Accents on top of the word and carefully sprinkle Warm Diamond Silk Microfine Glitter onto the wet areas. You can simply dab off the loose glitter later, since it will only stick to areas where the wet Glossy Accents is. Let dry properly.
6. Finally take some white texture spray ink and splatter around the card for a fun detail. Let dry.


By changing the color combination or adding letter stickers instead of die cut words, you can easily change/vary the look of the card.

We still have the leftover die cut Leaf Branches to use. Here is an example how you could use those leftover pieces:

Basically, using similar ideas, but replacing the background with a dry embossed white background piece and misting the die cut word you can create a nice card with the leftover pieces and nothing goes to waste. Here is a little start-to-finish video to give you a better idea of the single steps. Hope you like it!

Happy crafting,
Sanna

Supplies: 
Elizabeth Craft Designs:
Leafy Branch 4
Leafy Branch 2
Pair of Leaves 1
Thanks
Celebrate
Elizabeth Craft Designs – Embossing folders
Warm Diamond Silk Microfine Glitter
White Soft Finish Cardstock

Other: 
Purple, green, blue and red spray ink by Tattered Angels
White texture spray by Imagine Crafts
Glossy Accents by Ranger Ind. Inc.
Word stickers by Tim Holtz

Altered Christmas tree bauble – Ornament No.: 6

Today I will share my sixth and final altered Christmas tree bauble with you:

Sanna LippertStarting point again the same – cover the decoupage bauble with white gesso.

Sanna Lippert Take some lace ribbon, leftover chipboard pieces and some wooden pearls and layer them onto the bauble surface. For adhering I used a regular paper glue. Next cover the whole surface with a layer of gesso. Make sure you get all corners and edges covered. Let dry properly.

Sanna LippertThen place the ornament into a cardboard box for misting. Add several layers of spray ink. I used the Tattered Angels Plain Jane Simply Sheer Matte Mist tone Red Rose. In between layers I always let the surface air dry properly.

Sanna LippertFor the next step I used the High Impact Metallic White paint from Tattered Angels and applied paint droplets on the upper part of the ornament. To keep the paint from dropping all the way down used a heat gun to heat set the paint and keep it from dropping freely. This needs a little patience as you will need to „create“ one droplet at a time and heat set each one separately. But that way the droplets will have a more controlled form.

Sanna LippertFor final touches I again added some shabby white embossing enamel from Stampendous. Here again, like on the second bauble, I applied little areas at once, heat set those and then continued with the next area. Make sure you take enough distance in the beginning to „warm“ the enamel up and first then get close to it with the heat gun. This way it will not blow around, but stick right into the place it was supposed to be on. Finalize the bauble by adding half pearls here and there.

So this were all six altered ornaments I created for this Christmas. They will perfectly match our red and white tree theme and the good thing about these is that they will not break when they accidentally fall onto the floor :).

Like promised, here is the full set of ornaments.

Sanna LippertSanna LippertNumber one:

Sanna LippertNumber two:

Sanna LippertNumber three:

Sanna LippertNumber four:

Sanna LippertNumber five:

Sanna Lippertannddd… Number six:

Sanna LippertI hope you have enjoyed reading these little step-by-step tutorials. If you have been creating your own baubles, leave me a link to this post, I´d like to come and take a look and leave you some love!

Happy crafting,
xxx, Sanna

Now & then (start to finish layout) – Canvas Corp Brands

Hello again! Today I´d like to share a fun project I created for/with the Canvas Corp Brands products. It made me especially happy to see them use this particular layout as one of their webshop category photo (see here). Thanks so much, Canvas Corp Brands, had my little proud moment when I saw it there <3!!

Here is my start to finish layout project:

Sanna LippertAs a base for this layout I use the thick hand made paper from Canvas Corp. It is perfect for misted projects, as it is thicker than regular cardstock and also absorbs and reacts diffeerently with inks and mists than regular paper. So I first marked the areas where I would want to place my photos and banners with a pencil, before adding some white light texture paste onto the background. I used a „numbers“ The Crafter´s Workshop stencil for this purpose.

Sanna LippertI also used a 6×6″ sized The Crafter´s Workshop stenicl to add additional texture and pattern here and there. I let the paste air dry.

Sanna LippertNext I misted the paper with water spray and then added blue, red and yellow spray ink. I let the ink spread quite freely around the paper.

Sanna LippertWhile the paper was drying, I started inking the canvas bunting pieces. Here I used a Simply Sheer dark red tone mist and blue and yellow Baseboard tones. I added all three colors to each banner and let them dry a little.

Sanna LippertI also added some black Glimmer Glaze splatters here and there. Me and black Glimmer Glaze – partners for life 😉 …

Sanna LippertWhile the banners were drying, I stamped some patterns onto the layout background using a hand carved stamp and blue ink.

Sanna LippertThen I drew some hearts here and there with black high impact paint and a thin paint brush.

Sanna Lippertand then again, some black Glimmer Glaze 🙂 …

Sanna Lippertand next some doodles and arrows hand drawn with a black Sharpie.

Sanna LippertTime to put the banners and the photos on their places. I used Evalicious puffy stickers and cork stars (I think these are by Studio Calico..) as embellishments. Then I added some wood veneer letters, but they didn´t stand out enough from the background, so I painted them with black High Impact paint.

Sanna LippertNext I outlined the stenciled numbers with a pencil for more contrast.

Sanna LIppertand here is the finished layout:

Sanna LippertI hope you have enjoyed reading thru this little start to finish tutorial. Wish you happy scrappy times!!!

xxx, Sanna