Cadverous Charm Hybrid ATC set – The Nifty Pixel

Hello and welcome to take a look at another hybrid project, created with The Nifty Pixel Cadaverous Charm digi kit. This is one spooky, Halloween themed kit!!! And I´ve tried to be as spooky as possible when creating these Artist Trading Cards 🙂 !!!!

Sanna Lippert Carverous Charm ATC set

This is how I created this set:
Sanna Lippert Carverous Charm ATC setMy starting point was all kinds of bits and pieces from last years Halloween card set (see here). I also used the A3 sized apothecary bottle background paper on these ATCs. Here is more on how I print the papers in full A3 size to have more paper to use for layouts and cards, ATCs, tags etc.

Sanna Lippert Carverous Charm ATC set

Next I just fussy cut all the element pieces and some of the background paper into an ATC size (2 1⁄2 by 3 1⁄2 inches = 64 mm × 89 mm).

Sanna Lippert Carverous Charm ATC setAfter that I took a The Crafter´s Workshop stencil and applied some black Gesso thru it onto the background. Since the stencil itself had a nice leftover layer of gesso still on it. I turned the stencil and using a brayer, pressed the residue gesso onto the background.

Sanna Lippert Carverous Charm ATC set

Next I added some Imagine Crafts Irresistible Texture Spray onto the tags and let the layer dry properly.
Sanna Lippert Carverous Charm ATC set Sanna Lippert Carverous Charm ATC setFinally I went along and added the fussy cut element pieces onto the tags. Also adding some fussy cut text from the patterned paper that is also in the digi kit. I outlined the ATCs with a black pen and added rhinestones from my stash and some Crackle Accents by Ranger to create a more interesting look. I really, really like this set, even though it is a bit spooky!

Sanna Lippert Carverous Charm ATC set Sanna Lippert Carverous Charm ATC set Sanna Lippert Carverous Charm ATC set Sanna Lippert Carverous Charm ATC set Sanna Lippert Carverous Charm ATC set

I hope you enjoyed reading thru this little hybrid idea. Now hop over to the Nifty Pixel site to take a look at what my digi team colleagues have been creating! There is lots and lots of inspiration over there!!!

Happy hybrid creating,
Sanna

Travel ATC cards – The Nifty Pixel

Hello lovelies!!! It is again time to share a hybrid tutorial with some The Nifty Pixel product. This time I´ve created a set of four ATC cards with the Wanderlust digi kit collection:

Wanderlust Collection by The Nifty PixelHere is how I created these ATC cards:

Sanna LippertThese are the materials I started with (3 sheets of patterned paper and some additional elements from the kit, plus two pieces of plain white cardstock).

Sanna Lippert

I first cut two pieces of the globe paper into a ATC size (64 mm × 89 mm).

Sanna LippertNext I cut the tiny tags from the tag patterned paper, punched holes on top of them with the piecing tool by Tim Holtz and added some sewing yearn thru the holes. Boy, those tags sure were tiny!!! Sanna LippertAfter that I adhered the tags onto the globe paper, fussy cut a b&w printed sentiment (from the elements in the kit) and outlined the ATC with a black pen. Next I tore some wanderlust paper and glued that piece o top of the tiny tags. Sanna LippertAfter that I took a piece of corrugated cardboard and adhere that piece on top of the yellow paper (overlappingly). Finally I fussy cut a “R We There Yet” badge and added a orange colored banner on both sides. Sanna LippertFinally I also added some black ink splatters as well as some Glossy Accents details onto the artist trading card. Sanna LippertFor the second ATC I did similar things. Added a teared paper piece, then added a tiny tag paper on top and attached a strip of twine with a stapler on top. underneath all this there is a little piece of real glitter paper, just to add some shine to the card. Sanna LippertLike on the previous one, I added a badge image on top and underneath there is a corrugated cardboard banner for dimension. Also on this one I highlighted some areas with Glossy Accents. Sanna Lippert..and I just could not resist, I had to add some black Glimmer Glaze :). Sanna LippertThis is what the first two ATC´s look like. Now off to the next two:Sanna LippertFor these I used the wanderlust paper as a base. I cut some leaves from the tiny tags paper and outlined those with a black pen to give them a bit more structure. I also like to add outlining to my cards, therefore the black pen outline here again. Sanna LippertI had a negative die cut flower piece lying on my table and I found that I suited the travel theme very well, so I fussy cut it and adhered it on a piece of glitter cardstock (from my stash). I then again used some elements from the kit – printed in black & white! – as my sentiment on the ATC card. The became a coat of Glossy Accents to give them a bit more dimension. Finally some blue yarn under the wood veneer piece finalized the ATC. Sanna LippertNow for the last one. Here again I used the yellow patterned paper as my starting point. The black and white elements on the photo are from the kit – but just not printed in color. That adds a nice almost vintage kind of feel to the trading card. I used some bits and bobs from my stash, like the leftover piece of double sided adhesive. And the corc piece is from my stash too. Sanna Lippert I added the adhesive pieces on top of the paper, applied some copper microfine glitter on top. Sanna LippertThen all I needed to do was to assembly the previously picked pieces onto the surface, add some outlining, ink splatters and glossy highlights! This one is he simplest one of them all, but I really like the white space on it alot. And now some finished ATC card photos:

Sanna Lippert Sanna Lippert Sanna Lippert Sanna Lippert Sanna LippertOh, forgot to mention, as you might notice, I´ve added a wood veneer piece or two later and covered those with golden glitter glue. Just could not stop, I quess…. 🙂

Sanna LippertAs you can see, ATC cards don´t require much, you can go a long way with little bits and pieces. All those hybrid paper pieces you have as leftovers from your projects, why not use them for a quick tag or ATC card? Those are really fun to make!!! Hope you enjoyed this little hybrid step-by-step!

Happy hybrid scrapbooking,
xxx, Sanna

ps. two of these already went on their way and ended up in the US – was happy to swap with this girl 🙂 – another fun fact about ATC cards, you get to swap them and get to know new like minded, crafty people in the process! A definite win win!!