Monochromatic pink die cut background card – Elizabeth Craft Designs

Hello there everyone, it´s my turn to share a tutorial on the Elizabeth Craft Desings blog today again. I´d like to welcome you to my last tutorial of this year and also as the very last project as a die cut design team member at Elizabeth Craft Designs. It´s been a fabulous two years as a design team member in the team and I´ve enjoyed every minute of it.  But before I tell you more, I´d first like to share one more card tutorial with you all.
This card – well these cards, actually – were inspired by the recent background challenge. As you might recall, I made quite a few cards for that challenge. I love creating backgrounds for my projects with die cut dies, stencils and stamps as well as various media. This card features one of the new background dies and this is how I created it:

This card I really fast and easy to create and by changing the colors and the sentiments, it can be used for all types of occations. Or if you need need to make a few similar ones, you might want to take this type of card design into consideration.

This is how I created the card:
1. Take a die cut (use the Abstract Background die) protective sheet of a Clear Double Sided Adhesive sheet and place it onto a into size cut piece of white Soft Finish Cardstock to use it as a stencil.
2. Now add pink Distress Ink (Worn Lipstick) thru the die cut piece onto the cardstock. This creates a nice stenciled image onto the white cardstock.
3. Take a sheet of Clear Double Sided Adhesive and die cut a piece with the Abstract Background die cut die from it using your die cutting machine.
4. Now remove the backing of this sheet and adhere it onto the inked, stenciled piece of cardstock. If you don´t get it adhered exactly along the inked areas, that does not matter, as this will create a fun, additional 3-dimentional effect to the card later. So rather than trying to adhere in a perfect manner (see first detail photo underneath) try to leave some „white“ areas peeking thru.
5. After you have adhered the adhesive sheet, you can either leave the piece as it is, or add some ink to the lighter areas to correct your inking results, before you remove the protective sheet of the adhesive. OR just leave it as it is for the 3-dimentional look.
6. Now remove the protective sheet from the die cut piece and apply the Silk Microfine Glitter onto the adhesive areas. Make sure to keep the adhesive areas „clean“ and don´t touch them with your fingers. This way the glitter will attach to all areas equally well.
7. After pouring the surface with glitter, use a paint brush to remove the residue and pour that back into the jar. Then polish the surface with your finger to attach  the glitter with adhesive and to add more sparkle to the glitter.
8. Now take another piece of white Soft Finish Cardstock  and ink with pink Distress Ink, then stamp with black ink both the sentiment and the flower image.
9. Cut the sentiment piece into right size with a paper cutter and either fussy cut or die cut (with the matching flower die cut die) the flower image.
10. Adhere on place with 3D foam tape and paper glue. Finally decorate with glitter glue and liquid pearls.

On the upper card you can see the perfectly inked version of the background. The lower card has some white areas still peeking thru here and there. This adds a little bit more interest to the background by creating a 3-dimentional effect to the card.
To give you a better idea of each step, I again created a start-to-finish video for you to watch:

I hope you´ll enjoy this card idea and get inspired to try it out yourself! After two years in the team it is time to step aside from my duties as a die cut desgin team member and give space to a new team (very excited to see who will be joining in this time!!). However, I am not totally disappearing from the Elizabeth Craft Designs site quite yet. You will be seeing me posting projects on their site from time to time still, not as a desing team member, but more as a visiting blogger and guest designer. I am very much looking forward to next year and my new duties with Elizabeth Craft Designs team. So see you around again in January at their blog, lovelies!!!

There is a fun Wednesday challenge over at Simon Says challenge blog called „Party Time!“ and I´m joining the challenge with my Happy Birthday card.

Wishing you all a very Merry Christmas time and a happy 2018!!!
Happy crafting,
xxx, Sanna

Supplies:

December Die Cut DT challenge – Elizabeth Craft Desings

Hello there lovelies and welcome to the Eliizabeth Craft Designs December Die Cut challenge! This month the design team members were given a task to create their projects around BACKGROUNDS! I love creating backgrounds to my projects with various tools: stamps, die cut dies, stencils and various media. This time I concentrated on die cut dies, it being a die cut design team challenge. And here are the cards I created:

For the first card I used a strip of Clear Double Sided Adhesive as my starting point. I then die cut two Ornate Snowflake dies from white Soft Finish Cardstock and attached them to the adhesive background. Next I applied Teal Blue Silk Microfine Glitter over the surface (this is one of my fave glitter colors!) and polished the surface with my finger. Thru this procedure the glitter sticks to the surface and get an additional sparckle to it. Next I added some glitter glue here and there onto the snowflakes for additional interest and a half pearl into the middle of each snowflake. Finally I inked a piece of white Soft Finish Cardstock with blue Distress Ink (broken china) and stamped a greeting with the Winter Sentiments clear stamps on top. Some faux stiching around the edges and the card was finished.

For my next card I used one of the new Eizabeth Craft Desings background dies (Geometric Background) – I LOVE this one!!! It is so versatile and works with so many themes. You will be seeing this die showing up very often on my blog :). I first die cut this background pattern from white Soft Finish Cardstock, then removed all the negative pieces and adhered the positive background piece onto a strip of Clear Double Sided Adhesive Sheet. Then I took some Distress Inks in orange, red and green tones out and inked the pieces with these ink tones. After inking them I started to build the background together again by filling the empty areas with the inked pieces. Now this is like puzzle making, so it takes a while, but is so worth it! As you can see there are some glittery parts on the background too, those I left emtpy on purpose to add some Silverado Silk Microfine Glitter onto the areas. I love this shade of silver – it has a warm tone to it and it works great with the traditional Christmas colors!!! Then I went and inked a residue piece of white Soft Finish Cardstock with red and green Distress Ink tones and stamped both a sentiment and a flowers onto those pieces. Now all I needed to do was to fussy cut them, add faux stiching and some Nuvo drops, glitter glue and adhere them to the card. The flowers I adhered with 3D foam to give the card some additional dimention.

On my third card I´ve used the new Kaleidoscope backgrounddie cut die, again with white Soft Finish cardstock. I´ve followed the steps from the first card when creating the background. This time using Dark Mint Silk Microfine Glitter. Next I added a stamped and inked flower and sentiment (see the steps from card two) and decorated the card additionally with some Nuvo drops. This was a fun and easy card to make. So if you need to make plenty, you will be done in no time with this type of a card.

For my last card I used the Geometric backgrond die again. This time, however, I did not remove the pieces. I carefully adhered the whole piece onto the card base with Clear Double Sided Adhesive an then inked the background with Distress Ink (purple, pink and blue). For additional interest I added some cream toned spray ink splatters on top and die cut some hearts from with the new Buttons die cut die to go with the background. A little piece of twine on each button gives them a look of being sewn onto their places, however, they are just adhered to their places with liquid adhesive. Finally I decorated the card with the new „Sentiments 2 – just because“ stamp and die cut set. and added some glitter drops and light pink half pearls for additional decoration onto the card. Here are some detail photos of the cards to give you a better look:

I really like the new background dies and they are so much fun to use. Make sure to come back on Thursday, I will be sharing another fun background card idea with a short video tutorial here on my blog and over at Elizabeth Craft Designs blog. Now hop over to the Elizabeth Craft Designs blog to see more background themed projects, created by my design team colleagues!!

Happy crafting and happy holidays,
xxx, Sanna

Supplies:


Distress Oxide background cards – Elizabeth Craft Designs

Hello lovelies, today it is my turn again to share a little step-by-step tutorial with you over at Elizabeth Craft Designs blog. Here is what I created – a set of Distress Oxide, die cut background cards:

I had been going in circles for a while and avoiding ordering the Distress Oxides. Why, you think? Well, because I knew that the minute I get them into my hands, I will be hooked. Finally I gave in as I saw so many of my team colleagues having a ball with them. So I bought a set of 6.

Needless to say the six colors are definitely not going to be enough. Might as well have ordered the full set all at once *rollingeyes*. Anyways, here are the cards I created with the Oxides and the lovely Elizabeth Craft Designs die cut dies.

I´ve used both the positive and some of the negative parts on my cards as well as the DIY die cut foam stamp (see tutorial here) on these. Added some bits and bobs from my stash and just had a great time creating!! I do love color, so how on earth did I manage to get by so long without buying these inks *laughs*.

For more details do see my original post over at the Elizabeth Craft Desings blog (HERE). And to get you hooked too, here are the inks in action – enjoy the video:

Happy crafting,
xxx, Sanna

Supplies:

Layered tag set – Elizabeth Craft Designs

Hello everyone, it´s my turn today over at Elizabeth Craft Designs blog to share with you a fun and easy to do layer technique. This idea occurred to me when I was using texture paste on another project and I realized that I could create a paste-like look by only using various die cut dies.

Here is what I did:
    This is such an easy idea, yet it gives so much texture to the background that you might think it was done by using various media to create it. The only thing you are really using is paper and colors. So I took the die cut pieces and adhered them onto the previously misted tags. Then I placed the tags into a misting box (cardboard box) and gave them another spray ink layer treatment. I used exactly the same tones as I did on my first layer. After the spray ink was dry, I again added some negative leftover pieces onto the tags and again treated that layer with spray inks. Now that the background is done, I only have to decorate the tags. Next I added some detail to the flowers with a white gel pen and cut some burlap to make leaves and adhered both the flowers and the leaves on their places. Finally I took some liquid pearls and added pearl droplets into the middle of the flowers for additional detail. To finish off my tags, I added some ink splatters to the background and a fussy cut, stamped sentiment to each tag. Finally I decorated with with matching toned ribbons. Even though there are lots of patters and layers on the tags, the monochromatic theme makes them look very harmonious. And the tags are very easy to make. So if you don’t happen to own any stencils and pastes, you can create similar „paste-looking“ effects onto your projects by layering die cut pieces on top of each other and giving them a „color treatment“. I hope you have enjoyed this simple idea and will give it a try yourself!
Happy creating, Sanna

Supplies:


Technique Friday with Els challenge

Hello lovelies, it is again time for the Elizabeth Craft Designs Die Cut Design Team´s monthly challenge. This time we were challenged to use a Technique Friday with Els video as our starting point. I chose to make a Patchwork Card with embossing folders and Shimmer Sheets. Here is what I did:

Here are the steps shortly, for a full tutorial, see THIS VIDEO over at the Elizabeth Craft Designs YouTube channel.

First I took pink, light blue and red Shimmer Sheets and cut those into a width of approximately 1 inch. Next I placed them inside the Elizabeth Craft Designs embossing folders and ran them thru a die cutting machine.

After that I took a Postage Stamp Rectangle die cut die and a piece of blue toned patterned paper from my stash and die cut the paper into a rigth size. Next I cut another piece (white cardstock) into a slightly smaller size than the postage stamp piece.

Then I fussy cut the embossed and sanded (sanding block) pieces into appr. 1 inch each and adhered them onto the white cardstock piece that I had covered with Clear Double Sided Adhesive. Then I just flipped the piece over to cut the residue off along the edges of the white cardstock.

After that I die cut two Lacy Poppies from white Soft Finish Cardstock and adhered the postage stamp piece and the patchwork piece together with Clear Double Sided Adhesive. I added a velvet ribbon and a brad as decoration and finally stamped a sentiment with Joset Designs General Sentiments onto the right down corner with black stamp ink.

I really enjoyed creating this card after Els´ idea!! And I like the delicate shine the Shimmer Sheets add to the background. It looks really nice, yet it is so very easy to make!!!

For today’s challenge Elizabeth Craft Designs are giving away a $20 Gift Card to use on their website to 3 winners. To enter simply leave a comment on the Elizabeth Craft Designs Challenge post and tell „What your favorite technique learned from the Technique Friday With Els series“. 3 lucky winners will be selected in a random drawing & the winners will be announced on Friday, July 21 on the Elizabeth Craft Designs blog.

Now hop over to the Elizabeth Craft Designs blog to see what videos inspired my design team colleagues and what kind of cards they created!! And for more inspiration, don´t forget to visit the ECD YouTube channel too.

Happy crafting,
xxx, Sanna

Supplies: