Clean and simple masculine cards

Hello there everyone, it´s my turn again today to share another guest design team project at the Elizabeth Craft Desings blog. For today´s card idea I created a set of two masculine, clean and simple, graduation cards. As my son finishes his high school level and exams this June, I need a nice card for his graduation festivities.

I used woodgrain patterned paper and instead of flowers, just leaves to add a special touch to the card. Also, the leaves are done out of Shimmer Sheets, to add just a touch of festivity to the card. Here is how the card is done:

Step 1: Take light blue Soft Finish Cardstock and using the Summer Fun Sentiments stamp set and grey Distress Oxide stamp ink, stamp the sentiment „well done“ onto the carstock.

Step 2: Next die cut a piece of woodgrain paper using the Stitched Rounded Rectangles die cut die and then stamp „I´m so proud of you“ with black stamp ink onto it using the Build Your Own Sentiment 1 stamp set.

Step 3: Take a darker blue toned cardstock to mat the stamped cardstock strip. This will make the stamped element stand out more from the background. Then adhere the pieces onto the cardbase.

Step 4: Take a piece of Shimmer Sheet and apply a Clear Double Sided Adhesive sheet onto it. Now run the sheet thru your die cutting machine, but don´t die cut the image thru (don´t use a metal plate in your die cutting machine). This way you will get an embossed image. Next take your precision scissors and cut around the edges of the „embossed“ image.

Step 5: Adhere everything on place and add some faux stitching around the edges to finish off the card. Optionally you can also add a few Craft Drops for decor or leave the card as it is. You now have a easy-to-mail, flat, yet decorative, masculine card done.

Since I had all the products alraedy on my desk, I also did a second card using the same basic idea and the same products, but modified the idea a little. This is a great way to strech one basic idea and make several variations of it at once. Besides, it is always good to have a card or two for just in case as backup!

I hope I could inspire you to create masculine clean-and-simple styled cards yourself! See you again next month with another card tutorial. Until then, wishing you a lovely June.

Happy crafting,
xxx, Sanna

Supplies:

Miss you, Mom – card

Hello, it´s my turn to share another card tutorial over at Elizabeth Craft Designs blog today. Now, I haven´t seen my mom since Christmas 2019 due to the pandemic, so for this Mother´s Day I made a card that says what I feel. I could imagine that there are other people out there, who a dealing with the same problem, so I thought I´d share this card with you all today. But if you would rather like to say that you love your mom, then just change the sentiment. Easy!

For this card, I´ve created an easy-to-follow photo step-by-step. Here is how you can create this card:

Step 1: Start by die cutting 3 sets of the Ginko leaves from white Soft Finish Cardstock.

Step 2: Use green, yellow and pink Distress Ink tones and ink the die cut Ginko leaves.

Step 3: Cut a piece of blue cardstock to fit your card base size. Then adhere the inked Ginko leaves onto the blue cardstock either with Clear Double Sided Adhesive or liquid glue – whatever you prefer. Next cut off all excess pieces with scissors.

Step 4: Take a piece of white Soft Finish Cardstock and using the Build Your Own Sentiment 1 stamp set, stamp the word „mom“ with black ink onto it.

Step 5: Take a piece of white foam rubber and attach it onto Clear Double Sided Adhesive sheet, then take the Blackboard Alphabet die set and die cut the words „miss“ and „you“ with your die cutting machine. Arrange and adhere the words onto the background piece. Then fussy cut the word mom into a suitable size and add Craft Drops for decor. When the drops are dry, adhere the piece onto a card base. I also stamped and fussy cut a little heart from the same stamp set and added it to the card, but that is totally optional.

This is how the finished card looks like. And it is still flat enough to put into mail! I hope my mom likes the card and I hope you enjoyed this little card tutorial. And like always, by changing the sentiment and the colours you can use the same basic idea for different occations!

See you again next month with another Elizabeth Craft Designs tutorial.
Happy crafting,
xxx, Sanna

Supplies:

Clean and simple card backgrunds with nesting dies – Elizabeth Craft Designs

Hello everyone and happy Wednesday!!! Today I´m again stopping by to share yet another card guest design team project with you, created with Elizabeth Craft Designs products. For today´s project I wanted to share a set of cards, created with basic nesting dies. I wanted to show you how easily you can make fun and colorful card backgrounds in clean and simple style.

You only need a selection of basic fitted dies (for exampe rectangles, stars, hexacons or squares), a stamp set and a selection of colored cardstock. I chose to do a more monochromatic pattern on the above cards, but you could do more variation by picking all colours of the rainbow for a background. Here is how these cards were done:

Step 1: Pick three colours of cardstock in similar tones (I used grey, teal and blue tones). Then pick three of the smaller sized nesting Stitched Rectangles and die cut two pieces each with the smaller dies from the cardstock and one bigger sized piece.

Step 2: Arrange the pieces onto a card base and adhere them on place with Clear Double Sided Tape. Flip the card over and cut any excess pieces with scissors.

Step 3: Take a piece of black cardstock and stamp a sentiment with the “Build Your Own Sentiment 1” stamp set using embossing ink and fine white embossing powder. Heat set the powder with a heat tool and adhere the sentiment onto the card with 3D foam pads. For additional detail you can add some embossed stars around the sentiment and a few Craft Drops, if you want to.

I´ve also recorded a video step-by-step for you to watch to give a better idea on each step. Hope you like it!

And as you can see, by changing the dies and cardstock colours as well as varying the sentiments, you can create cards for various occations using the same basic idea.

I hope you get inspired by these cards and give all your basic nesting die cut dies a try with various cardstock combinations. This is also so much fun, because you can make several at once and depending on colour and chosen sentiment, they go for so many occations.

See you again with another tutorial next month!! Until then, happy crafting!!
xxx, Sanna

Supplies:

Beauty is a light – AJ page

Hello and happy Thursday! Today I´m stopping by to share a face from my art journal page with you guys. In the meantime I find it easy to draw tag sized faces, but a much bigger challenge for me is going bigger (like art journal page size).

I don´t get the proportions the way I want them to be. But anyhow, here is a face experiment with some stamped pattern on the background that I did using a DIY foam stamp (for details, see this video).

Rest ist done using my absolute current favorites – Neocolor 2 crayons by Caran d´Ache. I like the consistency of them so much. They are soft enough and can be used with water and a water tank brush and that is something I enjoy doing at the moment.

Also, could not resist to add a quote. She might not be a beauty, but there is light in her heart ;-). Just yesterday I talked to a colleague at work about drawing faces and my hobby in general and how it helps me relax and reload. Some people run to loose the stress, I reload my batteries thru my hobby.

Hope your day is a good one!
xxx, Sanna

Supplies:

Clean and simple Valentine´s Day cards – Elizabeth Craft Designs

Hello everyone, it´s that time of the month again: time to share my Elizabeth Craft Designs guest team member project with you! This time I´ve created a set of clean and simple Valentine´s Day cards with just a few products!

For this card I also recorded a start-to-finish video. I thought it would give you a better idea on how to work with the Clear Double Sided Adhesive and the Silk Microfine Glitter. See the video for all the steps on how to create this card. Hope you like it!

For my second card I used the same Fitted Hearts die set, but this time I took some of the Elizabeth Craft Designs washi tape and adhered that on a piece of white paper. After covering the paper with the washi, I ran two different sizes of hearts thru my die cutting machine and die cut the „washi paper“.

Then I just arranged the hearts onto a card base and adhered them on place. For finishing touches I added a stamped and heat embossed sentiment on a dark blue paper and fussy cut it into a banner form. A very simple and easy to do card was done in no time! If you have been looking for a nice way to use some washi, this card idea might be something for you.

I hope I could inspire you with my CAS cards today!! See you again next month with another Elizabeth Craft Designs product project here on my blog.
Have a great day!
xxx, Sanna

Supplies: