Wish Big – Elizabeth Craft Designs

Hello and Happy Monday! Today I´m up with a layout tutorial for the Elizabeth Craft Designs design team group post. I did some gelli plate play with acrylic paints and my DIY stamp, done a few years back with one of the dies available at Elizabeth Craft Designs. This was my starting point to this particular layout.

Here is how I created this page:

First I took some acrylic paints in light blue, light pink and light orange and my DIY foam stamp out. I applied the paints onto a gel plate with a brayer and then stamped with the dry stamp the pattern onto the paint. After that I just pressed the image onto white paper and repeated the procedure as six times to get six squares. After that I brayered some white paint onto the woodgrain paper and stamped random stamp patterns on top with the light orange paint and the same DIY stamp. If you are interested on seeing how I made the stamp, there is a tutorial up over at my YouTube channel.

Second I stamped some black stars onto the background using one of Sue Smiths stamp sets (see the full product list at the end of this post). After that I fussy cut the gelli plated squares and adhered them onto the background. Next I added some hand drawn outlining to them to make them better stand out from the background.

After that I stamped the „Wish Big“ sentiment onto the squares with black stamp ink and also stamped it onto a piece of leftover brayered paper with the same colours on it and fussy cut that piece with scissors. You will see that piece on the layout as part of the title. While the stamp ink was drying, I applied some „Artsy Scenery“ washi tape onto a piece of white paper and die cut the leaves using the Sidekick Essentials die set number 7. The washi tape covered leaves will create a nice detail to the mixed media page as decor. Before I adhered them onto the page, I ran them through a sticker maker, but you could apply Clear Double Sided Adhesive onto the back before die cutting them, so you have the same effect: DIY stickers! I just forgot that step, so I grabbed a sticker maker instead.

I also used the „Junk Journal Extras“ die to cut the lace border piece from a leftover gelli plate piece with my die cutting machine. I used a little bit different acrylic paint colours (stronger) to draw the eye towards the photo with this piece on the background.

Now all I needed to do was to arrange all pieces onto the page so that they pleased my eye. For additional decoration I took some older puffy stickers and star rub-ons from my own stash as well as a wood veneer piece to decorate the page a little more. I also matted the woodgrain paper onto a piece of dark blue/navy carstock to make the page „pop“ a little more.

There are so many fabulous products at the Elizabeth Craft Designs store that work great for scrapbooking. Just imagine what you can do with all the Planner Essentials and then take a look at for example the background dies. With those you could create cool background stamps for gelli printing, like I´ve done on this page. Just a few additional ideas to get you inspired :).

I hope you liked my project share from today! Be sure to check out what the design team girls did for this months group post!

Wishing you happy scrapping!
xxx, Sanna

Supplies:

DIY die cut foam stamps and cards – Elizabeth Craft Designs

Hello everyone, it´s my turn to post a tutorial for the  Elizabeth Craft Designs Die Cut Design Team today. I decided to share a DIY foam stamp idea with you. Sometimes when you look at the die, you wish there would be a stamp like that available too. That is what I thought when I saw the new ModaScrap die cut dies! They can be used to create gorgeous stamps and today I´d like to show you how I made some DIY foam stamps with those die cut dies and how I used the stamps for card backgrounds.

Here is how to make the stamps:

1. Take a piece of adhesive back foam (appr. 2 mm´s thick) and run the foam with a chosen die cut die thru a die cutting machine.
2. Take a piece of thicker foam – I saved mine from parcels I received – and adhere the die cut piece onto the foam.
3. Remove the small, negative, die cut pieces with tweezers. You can even adhere some of the negative pieces along the edges for additional pattern.
4. Take a precision knife and cut with foam carefully along the edges to match the form of the die cut piece. That´s all!

Here is a start-to-finish video on how I created the stamps:

And then for the fun part – here are two cards I created using the DIY stamps:


1. Take a piece of white Soft Finish Cardstock and a VersaMark/embossing ink. Apply ink onto the foam stamp and press the stamp onto the white precut paper.
2. Pour clear embossing powder over the stamped surface, dab the residue off with your finger and heat set with a heat gun.
3. Take Distress Inks and apply color onto the background with an ink blending tool. The embossed areas will resist the ink and this way the stamped background pattern will show.
4. Adhere to a card base and decorate with banners, doilie corners, die cut words and/or stamped and die cut images. Whatever you prefer!

Here is a start to finish video on the green „Hello“ card, I hope you get inspired to make some stamps of your own!

This is quite fun and actually very addictive. I could not stop creating my own stamps, once I was finished with the first one! The dragonfly die cut die, for example creates a lovely background stamp and you can vary the size by just using one piece or adhering several dragonflies next to each other onto a bigger foam piece. Oh, the possibilities are almost endless!! Have fun and
happy crafting,
xxx, Sanna

HERE IS A DIRECT LINK TO THE NEW PRODUCT RELEASE!!!

Supplies: 
Elizabeth Craft Designs
Dragonfly
Flower Lace 2
Flower Lace 1
Romantic corner
Flower Power clear stamps
Flower Power die set
A way with words – Hello
Soft Finish Cardstock, white
Clear Double Sided Adhesive Tape

Other:
Distress Ink
Clear embossing powder
Heat gun
Glossy Accents
Dimensional pearls
Waterproof stamp ink
VersaMark ink
Posca pen, black