Spring Flower Cards – Elizabeth Craft Designs

Hello everyone, time to share my first April step-by-step card project with Elizabeth Craft Designs products. They say that April showers bring May flowers. Well, I took an early start with a bright and flowery card set. I again used both the positive and negative pieces from the die cut images for creating my cards. I´ve used the Crystal Flower Set 1 and the Crystal Flower Overlay Set 2 on my cards and there is even a little bit of the Through the Lens – Wood Series patterned cardstock on my second card (links to all used products at the end of this post).

Sanna Lippert Sanna LippertHere is how I created my cards:
Sanna LippertCut a 4×8.5 inch sized piece of white Soft Finish Cardstock and adhered it onto a piece of Clear Double Sided Adhesive. Ink the white paper with Distress Ink in Wild Honey, Worn Lipstick and Victorian Velvet. Sanna LippertUsing the smaller flower die from the Crystal Flower Set 1, cut as many pieces as possible. Use all areas of the inked paper.
Sanna LippertNow cut a second piece of white Soft Finish Cardstock to the same size, attach to Clear Double Sided Adhesive sheet and use the Crystal Flower Overlay Set 2 for cutting as many white overlay pieces as possible. Take the „leftover inner pieces of the overlay flower“ using tweezers and adhere them onto the inked flower pieces. This takes a while, but the effect if definitely worth the effort.

Sanna Lippert Sanna LippertThis is how the finished flowers look.
Sanna LippertCut another piece of white Soft Finish Cardstock into a size of 4×5.5 inch, adhere onto a piece of Clear Double Sided Adhesive sheet and ink green with peeled paint Distress Ink.
Sanna Lippert Sanna Lippert Sanna LippertAttach all the prepared flowers onto the green inked cardstock piece. Fill all free areas and trim excess at the edges.
Sanna LippertUsing another piece of white Soft Finish Cardstock, again adhered on Clear Double Sided Adhesive, die cut two pieces of Sea Glass with the Jewelry Set 1 and a Hello sentiment.
Sanna LippertInk the pieces with Peeled Paint, Wild Honey and Victorian Velvet Distress Ink. Before adhering the flower piece onto the card base, wrap pink seam binding around the piece and tie into a bow.
Sanna LippertSanna LippertPunch holes into both Sea Glass pieces and adhere the Hello sentiment on the longer piece. Then use golden jump rings (and a pair of pliers) to attach the Sea Glass die cut pieces onto the card. Add a few paper flowers for additional decoration next to the seam binding bow and now the card is done.

Sanna Lippert Sanna LippertFor the second card, created with the Crystal Flower Overlay Set 2 positive images, you will need a 6×6 piece of Through the Lens – Wood Series patterned cardstock (yellow).
Sanna LippertAdhere the flower die cut images onto the cardstock, grouping them toward one side as shown above. Trim away excess at the edges.
Sanna LippertUsing a Stitched Rectangles die (second largest one from the set) run the flowered piece through your die cutting machine.
Sanna LippertTake a piece of white Soft Finish Cardstock and adhere it onto a piece of Clear Double Sided Adhesive sheet. Use the Alphabet 2 Lower Case die for cutting. Adhere the word ‚hi‘ onto the yellow background and the word ‚there!‘ (with exclamation point) onto the bottom right corner. Use a yellow marker to color in same tone as the patterned background cardstock BEFORE adding the word ‚there!‘). Cut small circles from Clear Double Sided Adhesive and attach them into the middle of each flower. Apply Saffron Silk Microfine Glitter onto those pieces, brush off excess glitter and polish with your fingertip to bring out the maximum sparkle. The second card is finished.
Sanna Lippert Sanna LippertBy using all the die cut flower pieces we end up with not only one, but two spring flower cards.

I hope you enjoyed reading through this step-by-step photo tutorial and get inspired to try some of these ideas on your own future projects!!

Have fun creating,
Sanna

Supplies: 

Elizabeth Craft Designs: 
Crystal Flower Set 1
Crystal Flower Overlay Set 2
Through the Lens – Wood series
white Soft Finish Cardstock
Clear Double Sided Adhesive
Jewelry Set 1 – Sea Glass
Hello
Stitched Rectangles
Alphabet 2 Lower Case
Saffron – Silk Microfine Glitter

Other:

White card bases – office supply store
Yellow marker – Stampin´ Up!
Distress Ink – Ranger Ind. Inc.
Jump rings
Pair of pliers
Paper flowers
Seam binding
Big Shot die cutting machine

For the Love of Squares – Elizabeth Craft Designs

Hello there! While I was preparing my trip to Creativeworld in Frankfurt, this blog post went up over at the Elizabeth Craft Designs blog. It´s all about squares! I just love to use basic die cut forms, as they can be used in so many various ways.

Here is what I created using the Stitched Square die set:

Sanna Lippert

1. Cut two strips of White Soft Finish Cardstock in appr. 8.5 x 2.75″ inch size. Run through a die cutting machine, three times each piece. Save the leftover strips for another project, as they look a little like photo negative strips and will be a fun starting point for another project!

Sanna Lippert

2. Spray green, red and orange spray ink onto the die cut pieces. Let dry.

Sanna Lippert

3. Add strips of Clear Double Sided Adhesive onto 3 die cut pieces. Then apply Silk Microfine Glitter – Fire Opal onto the adhesive areas and polish with your fingertip to bring out the sparkle.

Sanna Lippert

4. Choose three photos and cut them into the same size as the inked square pieces. To make sure the photos stay put while cutting, adhere them onto the plattform with masking or washi tape (low-tack tape that will not damage the photos).

Sanna Lippert

5. Use the “The Best Things in Life” stamp to stamp the quote onto three of the squares as shown in the photo above. Ink ONLY the part of the saying that is needed for that particular square. Clean the stamp thoroughly and dry it well before inking and stamping the next part. Repeat for the third square.

6. Run a piece of green cardstock thru a die cutting machine using the Fitted Frames 3 Curvy Rectangles die for cutting.

Sanna Lippert

7. Next use turquoise cardstock and one of the Bunch of Flowers 4 dies to cut some flowers. Use 3 full flowers and one half flower.

Sanna Lippert

8. Adhere the 6 misted die cut rectangles and the three photos in rows onto an A4 sized piece of white cardstock. Adhere. Next adhere the flowers and pieces of the Fitted Frames images next to the glittered and stamped areas. Add black ink splatters for additional decoration. Then adhere the center pieces of the Fitted Frames 3 Curvy Rectangles dies underneath the last squares on the left and the right side of the layout.

Sanna Lippert

9. Die cut another piece of Soft Finish Cardstock using the Alphabet 2 – Lower Case die. Remember to add Clear Double Sided Adhesive onto the cardstock before cutting. Save the leftover piece for later for another project.

Sanna Lippert

10. Outline the piece of white white cardstock with a black pen for more contrast.

Sanna Lippert

11. Ink the lower case alphas with black ink and adhere the title of the layout between the die cut images.

Sanna Lippert

12. Add white texture spray droplets here and there for additional detail.

Sanna Lippert

This is how the finished layout looks like. I hope you enjoyed this fun and easy step-by-step tutorial and will get inspired to scrap your own layout this way! For more inspirational projects, please see the Elizabeth Craft Designs blog!!
Happy Crafting,
Sanna

SUPPLIES:
Elizabeth Craft Designs –
1075 Alphabet 2 Lower Case
1030 Bunch of Flowers 4
1118 Stitched Squares
1063 Fitted Frames 3 Curvy Rectangles
RS009 The Best Things in Life stamp
Fire Opal – Silk Microfine Glitter
Clear Double Sided Adhesive
Soft Finish Cardstock

Other –
Spray inks (Tattered Angels by Canvas Corp Brands)
Texture spray (Imagine Crafts)
Black Glimmer Glaze (Tattered Angels by Canvas Corp Brands)
Black pen (Micron, Sakura)
Big Shot die cutting machine (Sizzix)
Rhinestones (ScrapBerry´s)
Black stamp ink (Hero Arts)

Danke cards – Elizabeth Craft Designs

Hello there, lovelies!! I am very excited to be sharing my very first blog post (with a tutorial) as a design team member of Elizabeth Craft Designs today. I have prepared a set of cards with the „Danke“ die cut die from the A Way With Words collection by Susanne Cannon.

These are the various cards I created using the same sentiment/word die cut die:

Sanna LIppertDoesn´t the Silk Microfine Glitter look gorgeous on the background? Want to read more about it, then hop over to the Elizabeth Craft Designs blog.

Sanna Lippert Sanna Lippert Sanna LippertI´ve also used lots of Elizabeth Craft Designs dies, Clear Double Sided Adhesive and Soft Finish Cardstock for creating these cards. Follow the direct links to the blog to see more ideas on how to use those products in various ways.

Sanna LippertI have used several die cut dies and other fabulous products from Elizabeth Craft Designs to create these cards – all used products are linked in the supplies list below AND there is a step-by-step photo TUTORIAL up over at the Elizabeth Craft Designs blog. Just follow THIS LINK to read all about the creating process!

I hope you will find these ideas inspiring and give them a try!
Happy creating,
xxx, Sanna

SUPPLIES:
Elizabeth Craft Designs
1033 Leafy Branch
1030 Bunch of Flowers 4
1157 Danke
1120 Stitched Rectangles
1116 Stitched Circles
1063 Fitted Frames 3 – Curvy Rectangles
Soft Finish Cardstock – 8,5×11″
Clear Double Sided Adhesive 101 mm
Clear Double Sided Adhesive 6 mm
Fire Opal – Silk Microfine Glitter

Other –
Distress Ink (Ranger Industries)
Big Shot die cutting machine – Sizzix
Washi tape
Paint brush
Black, white and green marker (Sakura, Signo, Micron)
Card bases
Twine (Whisker Graphics)
Rhinestones (ScrapBerry´s)
Spray ink (Tattered Angels by Canvas Corp Brands)

Don´t forget to fly – June MMCC, Vol. 4

Hello there! Today I will share my last take on the June COLLAGE challenge over at the Mixed Media Card Challenge blog. There is still a little time to play along with us, so I hope you grab your tools and dig into your stash and get creative :).

This months challenge is a really fun one. It is about creating a collage of some kind and as an additional element you can use a frame. I´ve again created my kind of collage and first glued all kinds of paper/tape/ribbon pieces onto a piece of cardstock, then used a Tim Holtz butterfly die cut die to cut some butterflies out of that particular paper and then created a frame (again with a die cut die and my Big Shot). I´ve colored the frame with yellow and green spray ink and then stamped some circles with Finnabair stamps onto the background.

Next I outlined the frame with a black pen, then glued the frame with the butterflies onto the card base, added a stamped sentiment in the middle and finally some enamel dots.

It is a quite fast card to create, although there are so many bits and pieces in there. And the fun part is that you can use all kinds of residue paper pieces and old product to create the collage butteflies. I bet flowers would look cool this way too. Will need to try that out some time later. I´ve really enjoyed this moths challenge alot, hope you do too and join in with us! We love seeing your creations!!

See you at MMCC,
xxx, Sanna

Freedom – MMCC June challenge, Vol. 2

Hello there and happy Monday!! Time to share some more Mixed Media Card Challenge blog inspiration again. For this months challenge you need to create a COLLAGE and as an optional element you can add a FRAME. Just click the above picture to get to the challenge page for more information.

This is the second card I created:

I again used bits and pieces of paper, washi tape, ribbon and border stickers, added layers of ink/stamping and/or stenciled paste over the areas and then used my Big Shot to die cut some butterflies from those paper pieces. Finally I added some enamel dots for additional decoration and my card was done.

Then I went along and painted a watercolor background with a Tattered Angels (patina) Glimmer Mist onto the card base, added some rubber stamp images (stamps by Finnabair) and sentiments. After that I just glued the butterflies down onto the card base and cut the residues off.

I will be sharing some more cards I created for this challenge later on this month and I hope you will come back to take a look ;-).

Have fun creating,
xxx, Sanna