Dreams take flight ATC set – STAMPlorations

Hello everyone, it´s again time for another STAMPlorations Mixed Media tutorial. Today I´d like to share a Artist Trading Card set and the steps, how I created them, with you. Here is what I made:

And now to the steps:

I started with a pink spray ink misted white paper piece on which I placed the Foiled stencil. I then applied watermark/embossing ink thru the stencil onto the paper and then poured a layer of Sticky Embossing Powder over the inked areas.

After heat setting the powder I took some foil sheets (gold) and pressed them onto the sticky areas. The foil sticks to the sticky embossing powder and leaves a nice godl foil surface onto the emboessed powder areas.

Next I took the Feathery clear stamp set and stamped some feathers onto a piece of white cardstock, again using watermark ink and this time embossing with clear embossing powder.

After heat setting the clear embossing powder I applied red and two tones of green Distress Ink onto my working surface, misted the ink areas with water mist and pressed the paper onto the damp ink. I got a really nice and soft hued paper in the process.

Then I just fussy cut the leaves along the edges with small scissors.

At this point I cut the foiled paper into a right size and as a result I had 4 ATC´s. I decorated them with boder stickes (from my older stash). I love using older product on my mixed media projects. It´s a good way of using up stash you necessarily would not use anywhere else.

 After that I splattered some black ink splatters onto the ATCs for additional detail and dimension.

Next I adhered the feathers on place and added some Harvest Moon glitter glue onto them for a fun detail. I let the glitter glue dry a while and then took a wooden stick and scraped the glitter areas a little. This way I was able to remove any concentrated glitter and smoothen it out abit.

Finally I stamped a sentiment several times onto white cardstock and inked it with a light green ink tone. After that I fussy cut the sentiments and adhered them onto the cards. Here is a closeup of the finished ATC.

This is it from me for this year :). I hope you can take some inspiration from my project into the new year. How about making the sentiment your motto for the new year? Do the projects you are dreaming of doing next year and let your creativity loose. Wishing you all a lovely holiday season!! See you in 2019 with fun projects again 🙂 !!!

Happy crafting,
Sanna

Supplies:

Opportunities ATC set – STAMPlorations

Hello there, everyone! It´s again time for Stencil Sunday. This time I created a set of two ATC´s. I chose a very monochromatic color combination for these two. I seem to be drawn to monochromatic at the moment. And again, this is also a reminder to play along with the current STAMPlorations Mixed Media challenge!! Read all about it here!!

And now to my ATC´s – here they are:
I first cut white cardstock into a right size and misted those pieces with Silk Glimmer Mist. Next I cut some Canvas Corp fabric into a slightly smaller size than the ATC base and placed them into a cardboard box for misting. I placed a stencil over the fabric pieces and misted with purple Baseboard Mist over the stencil. I was not particularly careful, if the image was perfect. I like this look alot.

After misting, I placed a white cardstock piece over the misted, wet stencil and rolled over the surface with a brayer to make sure all the residue mist absorbed into the cardstock evenly. This way I used the residue ink.

I then glued the fabric onto the ATC base, added some purple lace and DIY gympum flowers which I had decorated with mist and glitter glue. I then cut a piece of the brayered cardstock, stamped the word opportunities with a STAMPlorations stamp onto the paper and fussy cut those. After adhering the stamped words onto my ATC cards I just outlined them with a black pen and added a couple of gems for additional detail. I hope you get inspired to play with stencils and while doing so, please do join our challenge!! Just remember, no cards allowed (for rules read here).

Happy crafting,
xxx, Sanna

Supplies:
STAMPlorations – Create clear stamp set
ARTplorations – Hearts all over stencil
Tattered Angels – Iris Baseboard Mist
Tattered Angels – Silk Glimmer Mist

After the rain… – STAMPlorations

Hello lovelies! A new month means a new challenge – which means it is time to share some mixed media & stencil projects with you again :).
This month I kept to a smallish sized project, an ATC. And I´ve only used a single stencil on my project, but it is all it needs in my opinion.
This is my project:
 Sanna Lippert
I´ve first used a piece of misted and painted residue paper as my starting point. Then I wiped some blue Distress Ink (faded jeans) into the background thru the Droplets Mini stencil. Next I outlined the raindrops with a blue Posca paint pen. Finally I fussy cut this digital coloring file into right size, colored it with Distress Crayons and added a hand written sentiment on top. Sanna LippertI am a summer person, thus the sommery theme, even though it is very much fall aready ;-). Now it´s your turn to join in with us on this months challenge!
Remember to read the rules on how to play along (read here). Basically you are asked to create a mixed media project – anything except a card! And you need  to use a stencil (any brand goes). But for further instructions, please check the STAMPlorations blog! Also go there for more Inspiration and see what my DT colleagues have created!!

oh, and there are also PRIZES to be won :)!!!  Hope to see you there!

xxx,
Sanna

 Supplies:

ARTplorations stencil – mini droplets
Digital coloring file – STAMPlorations
Coloring book – STAMPlorations
Distress Crayons – Ranger
Distress Ink – Faded Jeans – Ranger
Posca pen – blue
White gel pen
Black pen – Staedtler

A set of maritime ATC cards – Elizabeth Craft Designs

Hi there, my turn again today at the Elizabeth Craft Designs blog to share a project. This time it is a set of maritime ATC cards.

Sanna LippertI love summer, sand and sea and therefore chose to create ATC cards around this theme. The new Joset Designs die cut dies are just perfect for creating such artist trading cards!! Here are the steps on how to create these ATC cards:

Sanna LippertStep 1: Cut a piece of the Through the Lens – Wood patterned paper into a size of 64mm x 89 mm (or 2 1/2 by 3 1/2 inch).Sanna LippertStep 2: Apply golden texture paste onto the piece of paper through a stencil with a palette knife. Let air dry.Sanna LippertStep 3: Take the „wave“ die cut die from the Boat die cut set and cut a piece of Soft Finish Cardstock – Mustard with the die. Adhere to the left side of the ATC.Sanna LippertStep 4: Apply some black ink splatters onto the background. Let air dry. Attach a piece of twine with a stapler onto the background, on top of the Mustard cardstock piece.Sanna LippertStep 5: Adhere another piece of Through the Lens – Wood patterned paper onto a sheet of Clear Double Sided Adhesive and use the boat´s wheel die cut from the Boat die cut set to cut 3 pieces from the paper. Adhere next to the Mustard cardstock piece.Sanna LippertStep 6: Use an old typewrite to write a sentiment for the ATC card, outline the words with a black pen.
Sanna LippertStep 7: For the second ATC, use the negative piece of the previously used Through the Lens – Wood patterned paper and adhere that onto a piece of Chocolate Soft Finish Cardstock. Add a wavy border and a piece of twine, like on the previous ATC card. Ink the edges with Distress Ink Vintage photo. Die cut some more boat´s wheel pieces, this time from the Mustard toned cardstock. Attach those onto the open spaces (include the whole piece, do not remove any parts). Apply Glossy Accents to mimic the boat´s wheel shape. Let air dry properly.Sanna LippertStep 8: Again add a typewrite sentiment and outline the words with a black pen. For additional interest, adhere small wood veneer pieces on top.
Sanna LippertStep 9: Again cut a piece of Through the Lens – Wood patterned paper into the ATC card size. Take a piece of Brick Red Soft Finish Cardstock and attach a piece of Clear Double Sided Adhesive on the back. Use the Seaweed die cut die to cut a piece of coral. Adhere onto the background. Don´t throw the negative piece away, we will use it later. I love using both the positive and negative parts!
Sanna LippertStep 10: Cut the Seahorse from a piece of white cardstock. The pieces are again backed with Clear Double Sided Adhesive. Color with blue and pink Distress Ink.Sanna LippertStep 11: Adhere the Seahorse next to the coral piece. Apply some glitter glue here and there on the Seahorse piece for a fun detail. Sanna LippertStep 12: Draw circles with a white pen onto the background to add movement and interest. Sanna LippertStep 13: Add a typewriter sentiment, outline with a black pen and add doodling around the edges. Sanna LippertStep 14: For the last ATC, again cut a piece of Through the Lens – Wood pattered paper into a ATC size, then cut a piece of Teal Soft Finish Cardstock in size of 4,5cm x 5,7 cm and adhere the negative coral piece on top of the teal one. Sanna LippertStep 15: Attach light blue, small eyelets onto each corner of the Brick Red cardstock piece. Sanna Lippert Sanna LippertStep 16: Draw white circles onto the background, then adhere the Brick Red cardstock piece into the middle. Next adhere a typewriter sentiment, outlined with a black pen, on top. Add glitter glue details here and there onto the blue coral piece. Finally add outlining with a black and white pen and some wood veneer piece for additional detail. This is what the finished pieces look like:Sanna Lippert Sanna LippertI hope you get inspired to create some maritime ATC cards yourself!! The new Joset Designs die cut dies offer a nice variety on maritime die cut dies that are just perfect for this kind of projects!

Have fun creating,
Sanna

Supplies:

Elizabeth Craft Designs:
Boat
Seaweed
Seahorse
Time for Teal Soft Finish Cardstock
Mustard Soft Finish Cardstock
Brick Red Soft Finish Cardstock
Dark Chocolate Soft Finish Cardstock
Through the Lens – Wood
Clear Double Sided Adhesive Sheet

Other:
Glossy Accents
Distress Ink – brown, blue, pink
Glimmer Glaze – black
Glitter glue
Wood veneer
Twine
Stapler
White pen
Black pen
Typewriter
Paper glue

English Roses – ATC cards

Hello there, lovelies! I could not resist but joining this months Mixed Media Monthly Challenge blog´s challenge #24. Such a fun challenge! See for yourself:

I chose to create ATC cards (a set of 4 actually) and I used both butterflies and blooms on them. I named this set „English Roses“ because of the color combination I used. I kinda got inspired by this photo of a flower store in Richmond on our stay in London, such lovely flowers and colors in there.

These are the ATC cards, I am joining this months challenge with. I have added book paper, ink splatters and drippings and punched, spray inked punched butterflies (Glimmer Mist by Tattered Angels). Underneath it all is a light blue flower stencil (The Crafter´s Workshop) pattern, created with a paste that I mixed from chalk paint and transparent texture paste. On top, a rolled DIY fabric flower (rose?) and some yarn.

Sanna Lippert Sanna LippertI only had enough fabric for three DIY flowers, so I took some paper flowers from my stash for the fourth one. Sanna Lippert Sanna LippertCreating these ATC cards was again combined with some lovely chatting with scrappy friends via Skype. Do you scrap with your friends online? We do. And it was my turn to come up with a challenge, so I asked them to use flowers and butterflies and a book page on their projects (and how practical, most of that just happens to match the Mixed Media MC challenge – so I am hoping they will be joining in this months challenge too with their creations). And since we now all created ATC cards, we will be swapping with each other.  Always great to get real mail!!!

And since I am allowed to join in on additional challenges too, I´m adding these ATC cards to the Simon Says Wednesday Challenge from the 25th of May, 2016: Anything goes.
Simon Wednesday Challenge Blog
I´ve never played along with them yet – there is always a first time for everything, right? 🙂

Happy creating,
xxx, Sanna

For some of the used product, look for these links:
Tattered Angels Glimmer Mists
The Crafter´s Workshop stencil
Imagine Crafts texture sprays
Paper Artsy Paints
Dylusions pens
Liquitex Titanium White Ink!