Waiting for the water to boil – Elizabeth Craft Designs

Hello lovelies! It is again time for another Die Cut Design Team challenge over at the Elizabeth Craft Designs blog. This time we were challenged to make „Anything but a Card“! So my choice was a layout. I haven´t been making as much scrapbook layouts recently as I would have liked to, so this was the perfect challenge to finally make one. Here is what I created:

This layout has plenty of Elizabeth Craft Design product on it, starting from the White Soft Finish Cardstock as a base. Next I added strips of the new ModaScrap papers onto the bottom and the top. I used the Viaggi Vintage and the Thinking about Polynesia 12×12 inch collections on this scrapbook layout. Then I added some heat embossed (white) sentiments from the Dream Sentiments set by Joset Designs.

A layer of Tattered Angels Aquamarine Glimmer Mist makes the heat embossed images really pop. After that I die cut ModaScrap leaves from Soft Finish Cardstock and then misted those with various Tattered Angels Glimmer Mist tones (Aquamarine, Marigold, Graphite, Suede and Grumpet). I also used some Java Glimmer Glaze (the black splatters) and Simply Sheer Soft Peach as well as Baseboard Gravel spray ink tones on the leaves.

I also die cut some of the letters on the title, then misted those with grey Glimmer Mist tone and added stickers and other alphas to go with those. I then added some stamped stars and rhinestones into the middle of the flowers.

I finished the page with hand written journaling and some faux stitching along the edges. Here is a start-to-finish video for you to watch to give you a better idea of the steps.

And now, hop over to the Elizabeth Craft Designs blog to see what the other design team girls have created for this challenge. For today’s challenge Elizabeth Craft Designs are giving away two sizes of the Clear Double Sided Adhesive which will include: a pack of the 5” x 12” sheets and a 10 mm roll of tape, in addition we will also give away a pack of the new ModaScrap 12” x 12” Viaggi Vintage Patterned Paper Pack to 3 winners.

To enter simply leave a comment on the Elizabeth Craft Designs Challenge post and tell us „Besides the classic card, what are some project ideas you like to play around with?” We will select 3 lucky winners in a random drawing. The winners will be announced on Friday, June 9 on the Elizabeth Craft Designs blog.

Wishing you all a happy, crafty day and lots of inspiration from the team!
Happy crafting,
xxx, Sanna

Supplies:
Elizabeth Craft Designs:
Soft Finish Cardstock white
Thinking about Polinesia paper
Viaggi Vintage paper
Dream Sentiments stamp set
Dandelion Fluff
Pair Of Leaves 2
Leafy Branch 4
Leafy Branch 3
Leafy Branch 2
Pair of Leaves 1
Entwined Ovals (used the flowers from this set)

Other:
Glimmer Mist – Suede
Glimmer Mist – Aquamarine
Glimmer Mist – Marigold
Glimmer Mist – Graphite
Glimmer Mist – Crumpet
Baseboard – Gravel
Simply Sheer – Soft Peach
Glimmer Glaze – Java
VersaMark embossing ink
Archival Ink Jet Black
White embossing powder – Ranger
Aleene´s Tacky Glue

DIY die cut foam stamps and cards – Elizabeth Craft Designs

Hello everyone, it´s my turn to post a tutorial for the  Elizabeth Craft Designs Die Cut Design Team today. I decided to share a DIY foam stamp idea with you. Sometimes when you look at the die, you wish there would be a stamp like that available too. That is what I thought when I saw the new ModaScrap die cut dies! They can be used to create gorgeous stamps and today I´d like to show you how I made some DIY foam stamps with those die cut dies and how I used the stamps for card backgrounds.

Here is how to make the stamps:

1. Take a piece of adhesive back foam (appr. 2 mm´s thick) and run the foam with a chosen die cut die thru a die cutting machine.
2. Take a piece of thicker foam – I saved mine from parcels I received – and adhere the die cut piece onto the foam.
3. Remove the small, negative, die cut pieces with tweezers. You can even adhere some of the negative pieces along the edges for additional pattern.
4. Take a precision knife and cut with foam carefully along the edges to match the form of the die cut piece. That´s all!

Here is a start-to-finish video on how I created the stamps:

And then for the fun part – here are two cards I created using the DIY stamps:


1. Take a piece of white Soft Finish Cardstock and a VersaMark/embossing ink. Apply ink onto the foam stamp and press the stamp onto the white precut paper.
2. Pour clear embossing powder over the stamped surface, dab the residue off with your finger and heat set with a heat gun.
3. Take Distress Inks and apply color onto the background with an ink blending tool. The embossed areas will resist the ink and this way the stamped background pattern will show.
4. Adhere to a card base and decorate with banners, doilie corners, die cut words and/or stamped and die cut images. Whatever you prefer!

Here is a start to finish video on the green „Hello“ card, I hope you get inspired to make some stamps of your own!

This is quite fun and actually very addictive. I could not stop creating my own stamps, once I was finished with the first one! The dragonfly die cut die, for example creates a lovely background stamp and you can vary the size by just using one piece or adhering several dragonflies next to each other onto a bigger foam piece. Oh, the possibilities are almost endless!! Have fun and
happy crafting,
xxx, Sanna

HERE IS A DIRECT LINK TO THE NEW PRODUCT RELEASE!!!

Supplies: 
Elizabeth Craft Designs
Dragonfly
Flower Lace 2
Flower Lace 1
Romantic corner
Flower Power clear stamps
Flower Power die set
A way with words – Hello
Soft Finish Cardstock, white
Clear Double Sided Adhesive Tape

Other:
Distress Ink
Clear embossing powder
Heat gun
Glossy Accents
Dimensional pearls
Waterproof stamp ink
VersaMark ink
Posca pen, black

Happy Anniversary tag – Elizabeth Craft Designs

Hello there, everyone and happy Tuesday!! Yes, I have another Tag Tuesday project share prepared for today :). And no, I am probably not going to be able to make them for every Tuesday, but I try to post at least one or two a month. Here is a anniversary tag I made:

This one is again one of the projects that travel with the Elizabeth Craft Designs booth from show to show. I´ve used a stencil, a heart and a word die from the Elizabeth Craft Designs product line on this tag. And some Silk Microfine Glitter to spark the heart up a little bit. Other than that there is some white gel pen „faux stitching“ along the edges, a Happy Anniversary sticker sentiment, some white texture paste and wood veneer as well as ribbons from my stash. Tag are great for using up ribbons – from which I own  a few big boxes, so I can make plenty of tags, before I run out of ribbons…

I hope your week has started smoothly, have a great day!!!
Happy crafting,
xxx, Sanna

Supplies:
Elizabeth Craft Designs – Lace Heart
Elizabeth Craft Designs – Love Sentiments
Elizabeth Craft Designs – Feathers Stencil
Elizabeth Craft Designs – Silk Microfine Glitter
White gel pen
Wood veneer
Ribbons
3D foam
Patterned Paper
Rhinestones
Glossy Accents
Texture paste
White tag

Teen boy birthday card – Elizabeth Craft Designs

Hi everyone, today is again my turn to post a tutorial for the  Elizabeth Craft Designs Die Cut Design Team. I decided to share with you a teen boy birthday card idea. My son recently celebrated his birthday and this is the card I made for him. This card is fairly easy to make and by changing the colors you can easily create a card for a teen girl using the same idea too.

Here is how I created the card: 


Step 1: The materials you need are a card base, a piece of Soft Finish cardstock for die cutting, Clear Double Sided Adhesive sheet, Words die cut dies, spray inks and another piece of cardstock to work as a background piece for the card.


Step 2: First you will need to cut a piece of white Soft Finish Cardstock into a right size (slightly smaller than your card base). Then place that piece into spraying box and add both red and blue spray ink (or whatever color you prefer!) to the cardstock piece and dry with a heat gun. Next adhere the long strip of Soft Finish Cardstock onto the Clear Double Sided Adhesive strip. Then place the piece into your die cutting machine and cut words. Use the whole piece, whatever is left over, can be used on further projects.


Step 3: Then remove the die cut words from the adhesive back cardstock and adhere in random order onto the misted piece. Cut along the edges with scissors to remove any overlapping pieces. Adhere to the cardbase.


Step 4: Next cut a Stitched Circle from a white Soft Finish Cardstock piece and add some foam stickers into the middle. I added the number 14, since it´s was his 14th birthday. Use 3D-foam to adhere the circle onto the card base to give it even more dimension.



Step 5: Finally take a piece of adhesive back black foam and die cut the word Birthday from it. This way you can create your own DIY foam sentiments, words and alphas. Adhere the word underneath the circle. The card is done.

Here is one more card, created using the exactly same idea. I just changed the background colors a little bit and used a Fishtail Banner for the sentiment instead of a circle. I hope you enjoyed this little step-by-step tutorial and got inspired to use word die cut dies for creating fun card backgrounds.

Happy crafting,
Sanna

Supplies: 
Elizabeth Craft Desings
Stitched Circles
Thinking of you
Party
Thanks
Smile
Celebrate
Happy Birthday
Stitched Fishtail Banners
White Soft Finish Cardstock
Clear Double Sided Adhesive Sheet

Other:
Card base
Spray inks by Tattered Angels
Foam alpha stickers
Adhesive back foam sheet
3D foam pads

Smile – Elizabeth Craft Designs

Today I´m quickly dropping by here just to share a fast and easy card that really does not take that long to make. Yet, depending on the papers you use or the patterns and colours you choose, you can create a card for practically any occation.

I used the new Elizabeth Craft Designs releases for this card: The Stitched Fishtail Banners with the die cut word Smile. I first took a piece of white cardstock, placed the word smile on the right lower corner to create an open area there. Then I matted that area with a green patterned paper from the back. Next I cut patterened papers with all the various Stitched Fishtail Banner dies. Now all I needed to do was to adhere the white cardstock piece with foam dots onto a card base for a more dimensional effect and adhere the die cut patterned paper pieces overlappingly. I added three small puffy stickers for decoration and the card was done.

Go check out the new releases over at the Elizabeth Craft Designs website. I adore them!! So many GORGEOUS die cut dies in this release.

Happy crafting,
xxx, Sanna

Supplies:
Patterned paper – Basic Grey
Smile – Elizabeth Craft Designs by Els van de Burgt Studio
Stitched Fishtail Banners – Elizabeth Craft Designs by ModaScrap