Let´s Ketchup card – Elizabeth Craft Designs

Hello everyone, it´s time for my September guest blog post tutorial  with Elizabeth Craft Designs today. I am creating a fun and easy-to-do masculine card using the Backyard Barbeque die cut set and plenty of Soft Finish Cardstock on this month´s card.

Here is how I created the card:

Step 1: Using the Backyard Barbeque die cut set and True Blue, Sunflower, Ladybug Red and Café au Lait Soft Finish Cardstock tones, die cut the grill, flame, tire and ketchup bottle images with your die cutting machine.

Step 2: Take a slightly smaller piece of white Soft Finish Cardstock and cut into size. Now adhere the Wood Effect paper onto the precut cardstock piece with Clear Double Sided Adhesive Tape.

Step 3: Adhere the previously die cut pieces onto the card base using a glue pen adhesive. Fussy cut the white label piece onto the ketchup bottle and adhere on place.

Step 4: Ink around the Wood Effect paper edges with black ink to create more contrast to the card.

Step 5: Using the Misti Stamping Tool stamp the „Let´s Ketchup“ sentiment onto a piece of white Soft Finish Cardstock and cut into a banner following the natural form of the stamp image.

Step 6: Adhere the sentiment and the ketchup bottle on place and decorate with black Liquid Pearl dots to add interest and detail to the card. Let dry.

Step 7: Adhere the finished piece onto a white cardbase.

This is how the finished card looks like.


I hope you have enjoyed my tutorial – see you again next month.

Happy crafting,
Sanna

Supplies:

One background, two cards – Elizabeth Craft Designs

Hello everyone, it´s time to share another guest post over at Elizabeth Craft Designs blog today. For today´s post, I´ve created two love themed cards that can be used for example for Mother´s Day.

What I did, is I created only one background piece with heat embossing and inking technique and with a clever trick I got two cards out of just one background piece. Here is what I did:

Step 1: Take a piece of Soft Finish White Cardstock and cut it into a card size. It can be slightly bigger, so you can adjust the size after finishing the background.
Step 2: Take the Love Sentiments clear stamp set and stamp with embossing ink onto the cardstock piece. Don´t worry, if the images are not perfectly aligned. That only makes the background look more interesting.
Step 3: Stamp 2-3 rows and then pause to apply white embossing powder over the stamped images. Apply the powder and heat set with a heat tool. Then repeat stamping and embossing, until you reach the bottom of the card.
Step 4: For additional fun interest, add also some crosswise stamping across the cardstock surface.

Step 5: Now take a Abandoned Coral Distress Oxide ink and apply it all over the cardstock piece with a blending tool.
Step 6: Next place the inked piece into your die cutting machine and die cut 15 little hearts with the Buttons die cut die from it. Make sure this time the die is aligned nicely to from 3 rows of hearts next to each other.
Step 7: Then take two white card bases and a sheet of Clear Double Sided Adhesive. Cut a slightly smaller piece of the adhesive than the size of the card to leave some white space around both edges. Cut two pieces in the same manner.
Step 8: Take the embossed and inked negative piece and adhere it onto a piece of adhesive, but don´t touch the adhesive areas. This way the glitter will better stick to the surface later.

Step 9: Remove the protective cover sheet of the adhesive and apply Light Brown Silk Microfine Glitter onto the open areas. Remove residue with the brush and polish the surface with your finger.
Step 10: Adhere this piece onto the card base. Then repeat the steps 8-10 with the die cut hearts and the Clear Double Sided Adhesive and the glitter.
Step 11: Finally, take a leftover piece of White Soft Finish Cardstock, the Love Sentiments stamp set and stamp sentiments using a black stamp ink. Cut into banners and adhere with a paper glue onto the cards. For detailed steps, see the attached video.

This way you have just created a positive and negative card using the exact same technique and still you have two slightly different cards as an end result. Also now you can give one card to your Mum and the second one to your Mother-in-law or your Grandmother. I hope you have enjoyed this months card idea and the video.

Wishing you a great time crafting & see you next month!
xxx, Sanna

Supplies:

Girly Christmas card

Hello there everyone!!! I hope you all are having a lovely holiday season and some relaxing downtime from all the fuss with your family and loved ones! I am enjoying a couple of days off work. So in between eating Christmas cookies and good food, I am dropping by to show you a girly Christmas card. The recipients wish was to have loooots of glitter and pink on the card, so this was my interpretation on that: 

I´ve used a die cut Christmas tree I received from am Xmas card swap I join every year. I really like this fliligree tree very much. I´ve frist taken a pink paper and stamped snowflakes with VersaMark ink onto it, then heat set a white embossing powder onto them. The little spots here and there are supposed to be additional snowfall :). then I took another pink patterend paper, covered that with clear double sided adhesive from Elizabeth Craft Designs and placed the die cut tree onto it. After that I poured a layer of pink SIlk Microfine Glitter onto the areas and attached (polished) that with my fingers to the adhesive.

Finally all I needed to do was to add a stamped sentiment (Stampin´ Up!) and glitter glue details (Nuvo and Stickles) and some wood veneer stars to the card. Finished the card off with some faux stitching around the edges. That was it. The recipient really liked her girly card, so I am happy to have accoplished my task to her liking :).

Next up will be a masculine Christmas card, so be sure to come back for that in a few days time :). Merry Christmas and happy crafting,

xxx, Sanna

Supplies:


Die cut candle Christmas card

Hello everybody! Like I already told you, this year I am taking an „early start“ to creating Christmas cards and what better way to make some than to grab the brand new Elizabeth Craft Designs Christmas themed dies and create with those!

Here is what I did:

I started by taking a piece of old book paper and inking the edges with Iced Spruce Disterss Oxide ink. I love the tone of this ink!

Next I die cut the base of the candle from Misty Mauve Soft Finish Cardstock, then took a piece of Pale Peach Soft Finish Cardstock and die cut the second candle layer from that one. The branches are die cut with the same die, but I used a relatively old green paper from my own stash.

This kind of projects are perfect for sneaking in papers that I´d probably otherwise not anymore. But here this green paper works really well. I then die cut the bow from Thru The Lens – Wood paper. It was one with some dark red wood pattern on it and I found that it worked really well together with the branches. So you see the papers you use for Xmas cards do not necessarily have to be from a Christmas themed pack, if you don´t happen to have any. You can as well make other papers work too :)!

I covered the back of the papers with Clear Double Sided Adhesive before die cutting, this way it´s very easy to adhere the pieces on their places and there is no mess with a paper glue. I am normally a paper glue user, so that being said, I am slowly noticing the practicality of other adhesives here too :). For this type of projects, with tiny, detailed pieces it is really great to have the option of using double sided adhesive sheets you can die cut with the paper!

After I had all pieces die cut, I simply needed to adhere them to their places, build the bow and layer the branches and the flames etc. on top of each other/next to each other. See how I also used the negative swirl pieces from the candle between the branches? I didn´t want to throw them away so I figured they´d make for a nice decorational detail in between the green twigs.

Finally I added some rose gold Stickles and red Liquid Pearls here and there for additional detail and dimention. I even added a stamped sentiment (with black ink) inside the card using the Joset Designs Winter Sentiments clear stamp set. So when you flip the card open it says: „It´s the most wonderful time of the year“ inside it.

I hope you enjoyed this little Christmas card idea and get inspired to try this die cut die for your Christmas card projects.

Happy crafting,
xxx, Sanna

Supplies:


Boo card – Elizabeth Craft Designs

Hello everyone, today is my turn again to share a card tutorial with you over at the Elizabeth Craft Designs blog with you. This time I am keeping to the Spookalicious theme as Halloween is not far away anymore! If you are looking for a simple and easy to do card idea for Halloween, this might be to your liking.

I´ve also done a start-to-finish video for you to watch. For more details see Elizabeth Craft Designs blog :)! I hope you enjoy this idea!

Happy crafting,
xxx, Sanna

Supplies: